Snow Load Calculator

Estimate the total weight and pressure (PSF) of snow accumulated on a roof based on snow type and depth.

Accumulation Data

Roof Area (sq ft) (ft²)

Snow Depth (in) (in)

Snow Type

Load Analysis

Enter area and depth to calculate snow load

Overview

Snow load is the downward force on a building's roof by the weight of accumulated snow. It is a critical factor in structural design, especially in cold climates where heavy accumulation can lead to roof failure.

💡

Pro Tips

If you see signs of stress like sagging ceilings or doors that won't open, use a roof rake to carefully remove snow.
Pay attention to 'drifting', where wind blows snow into deep piles against walls or on lower roof levels.
Never climb onto a snow-covered roof; it is extremely slippery and the added weight of a person can trigger a collapse.

Fun Facts

"Fresh snow is light (3-5 lbs/ft³), but wet snow can be 3x heavier (10-15 lbs/ft³)."
"Ice is much denser, weighing approximately 57 lbs per cubic foot."
"Most residential roofs are designed to handle 20 to 40 pounds per square foot (PSF) of snow load."

Formula: Volume (ft³) = Area × (Depth / 12) Weight = Volume × Density (lbs/ft³) Load (PSF) = Weight / Area

Used with this

Similar tools that might be useful

AC Room Size Calculator

Find the perfect AC unit size based on room dimensions and environmental factors.

AC Tonnage Calculator

Calculate air conditioning capacity in tons and BTU for your home with precision.

Air Changes per Hour (ACH)

Measure ventilation effectiveness by calculating room air replacement rates.